What To Do After Sanding Wood

Apply a heavy coat of sanding sealer and allow it to soak into the wood.

What to do after sanding wood. Start by blowing off the bulk of the sawdust and sanding residue t using an air compressor fitted with a blower nozzle. It will remove any scratches left by the medium sandpaper and will eliminate any remaining loose fibers in the wood. Sanding wood removes flaws in wood like dents gauges or mill marks.

After this second sanding the wood is ready for a stain or clear protective finish to be applied. Instead use a tack cloth a sticky piece of cheesecloth made especially for this purpose. Sanding and refinishing your wood floors comes with a lot of benefits.

The downside of using this procedure is that after you make an entire pass at an angle you must follow it with another pass parallel to the grain at the. Watch cabinetmaker Steve Maxwell explain the method he uses for prepping wood for a flawless finish. It allows the wood to have a much smoother surface which is important for other steps in woodworking like priming staining and painting.

It helps your wood absorb the stain more evenly. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. By sanding before applying a fresh coat of stain you are ensuring the stain will adhere to the wood well and last for years before needing a new coat.

Refinish your wood immediately after cleaning before the dust resettles back and interferes with the process. You will need to use mineral spirits after sanding. Wipe the folded tack cloth.

The angle does not need to be drastic. It has been a woodworkers tool for a long time. Using denatured alcohol after sanding would work too.