How To Prepare Wood For Painting After Sanding

The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining.

How to prepare wood for painting after sanding. The first thing first is surface cleaning. Hand-sanding is preferable for fine finishes and delicate pieces. Watch cabinetmaker Steve Maxwell explain the method he uses for prepping wood for a flawless finish.

You can create a makeshift sanding aid by wrapping a piece of sandpaper around a block of wood that fits in your hand. Steps to take for cleaning wood before staining is similar to painting. Start with 60-grit sandpaper and then do final smoothing with 100-grit sandpaper.

You will need a hand brush to clean the dust. How to Sand Wood Siding Use a power a 5-inch power disc sander to smooth the edges of scraped areas or remove paintit is lightweight and easy to handle. Once the surface is cleaned up get ready to perform the initial sanding.

It takes four steps to sand wood to perfection. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. The denatured alcohol will help pick up even the finest dust and since it evaporates very quickly it will not discolor the wood in any way.

Also the advantage of using mineral spirits when compared to water is that water swells wood also. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits.

Heat and friction when both applied to the material can smoothen the surface immediately. Before painting wood siding fill large holes and gouges with a two-part resin filler such as Minwax High Performance Wood Filler. It covers the prep sanding and priming process I take before painting a piece of.