How To Wash Wood After Sanding
It is good to use a shop vac to clean the surface between sanding grits removing the larger grit particles from the wood before sanding with the next higher grit.
How to wash wood after sanding. They are very handy if you need to de-grease anything. Instead use a tack cloth a sticky piece of cheesecloth made especially for this purpose. Then switch to fine sandpaper 200 grit until the entire piece is uniform.
This will help remove dirt and mildew from the wood surface. In order to remove the last remnants of the old finish then you must use a medium grit sandpaper. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits.
After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. As an optional step you can apply wood cleaner and brightener. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain.
Wood dust from sanding will cause problems if its not removed from the surface before staining. You can knock down the fuzz by sanding -- as long as you wait for the wood to dry. Once soaked you want to use a stiff bristle brush to scrub the surface of the deck being sure to keep it wet.
While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it. When exposed it will absorb water or the cleaner and warp. Always see to it that you will be sanding along the wood grain.
It is not that difficult and not that expensive. You will need a few hours to. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining.