How To Use A Wood Lathe

Observe the proper safety measures when working with a woodworking apparatus.

How to use a wood lathe. Handle heavy chucks with care and protect the lathe ways with a block of wood when installing a chuck. A good mini wood lathe requires a good foundation and this often starts with the bed of the lathe a horizontal beam that runs across the base of your lathe. Step 3 Use the left hand to guide the tool by holding your hand over the tool near the blade edge.

Two Basic Methods for Turning With a Lathe One way is to use the headstock and the rear spindle to suspend a piece of wood between the two and turn along the length of the piece of wood. These machines range in size from hobby models that fit on a work bench to large industrial-sized machines weighing hundreds of pounds but they all share some basic elements. Mount the workpiece into the headstock of the lathe using a holder called jaw chuck Most of the modern mini-lathe come with a chuck guard.

Put that guard on select the direction of the rotation and then turn on the lathe. Know where the emergency stop is before operating the lathe. Turn on the wood lathe and cut the wood into the desired shape.

Just as with the four-jaw chuck screw attachment to attach wood to a lathe using the dedicated screw chuck be sure to seat the blank all the way down to the base for a secure attachment. This is referred to as spindle turning and is the type of woodturning that is done to create long ornate table legs and other long wood turnings. The right hand should be held secure at the back end of the tool.

If a separate table is not available use. Rotate the lathe at a certain RPM and dont ever forget to. Ad At Surplex you will find used machinery and industry equipment at best prices.

Never lay tools directly on the lathe ways. If youve ever wondered how to use a wood lathe you dont wanna miss this video. Be sure you will get the best out of more than 4000 used machines and tools.