How To Prepare Varnished Wood For Chalk Paint

For stubborn dirt and grease use warm soapy water but avoid harsh chemicals.

How to prepare varnished wood for chalk paint. If its really stubborn you can use a hot iron over the damp towel to steam it and loosen the glue. Let the primer dry which usually takes about an hour. Learn how at Bunnings WarehouseFor more DIY.

Then place a damp towel over the remaining sections. At the time Sherry had used a non-yellowing varnish but despite what it said on the tin it had developed a yellow tinge not the look she wanted. Give a quick clean of the varnished wood Firstly preparing wood for painting need some cleaning.

In most cases one coat of primer is enough. Ive experimented with this because Im a lazy arse who doesnt like sanding stuff down. My preference for cleaning furniture is 1 part white vinegar to two parts warm water with a drop of dawn dish soap.

Revitalising an old varnished piece of furniture like a table or a cabinet is easier than you think. I then wipe back with a cloth or paper towels wearing glovesand then respray with pure water and wipe back againand done. Purchase My recommended Tools Brushes Paints and Primers Here.

Vacuum all the cobwebs inside underneath and on the back. Either oil or water-based primer can be used with water-based paint. One such primer is BIN from Zinsser.

Apply the putty filler with a scraper or a putty knife like the knife from Titan tools or Warner so that it is applied thoroughly and evenly. In the past you would use eggshell or gloss paints which would need priming and then another couple more coats. Then you are ready to paint.