How To Prepare Stained Wood Trim For Painting

First clean the stained surface with soapy water to remove any dust dirt and cobwebs.

How to prepare stained wood trim for painting. Stain-blocking primer is an exterior primer designed to prevent natural redwood and cedar oils from seeping to the surface. Lightly sand all the wood trim using a 220 grit sandpaper. Vacuum up as much of the dust from sanding as possible.

Wash Surface Wash the surface of the trim with a TSP solution or a low-phosphate household cleaner. If you are searching for a wood primer to paint any surface indooroutdoor with enhanced stickiness do not pass Zinsser produced stained wood primer. Follow the manufacturers recommended drying and painting.

The primer integrates elements that help it produce extra. Use a stiff putty knife to scrape loose paint to the bare wood. This should help break up the varnish and give the primer a solid base to adhere to.

Then follow these general preparatory steps for painting over stain. Zinsser 03504 Cover Stain Interior. After the drying period if bare wood or spackle is showing apply another coat of primer to the trim.

Peak Pro Painting offers residential and commercial painting services to the greater Denver m. A putty knife to scrape peeling paint and apply fillers a paint scraper for rough oil-based paint sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste. Then wipe down each surface with a tack cloth to ensure no dust was left behind.

To ensure the surface of your wood is level use a putty knife to fill any holes or cracks with a spackling paste. Wipe off the excess and if you want to sand it lightly but I never doI just wipe off the excess with my finger so just the hole is filled 3 Wipe down all of your trim with a damp cloth. With this primer your white trim.