How To Prep Wood For Paint After Sanding

After scraping youll notice that the remaining paint forms a ridge around the exposed wood.

How to prep wood for paint after sanding. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. A putty knife to scrape peeling paint and apply fillers a paint scraper for rough oil-based paint sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain.

Allow the dampened wood to dry 30 minutes before the final sanding. It is good to use a shop vac to clean the surface between sanding grits removing the larger grit particles from the wood before sanding with the next higher grit. Generally paint doesnt adhere to the slippery surface of varnished wood thats why sanding is required.

Dont sand all the way to bare wood just enough to remove any shine. Using 150-180 sandpaper give the piece a light sanding. Sand down the edges of bare spots.

Capturing dust Dust is the enemy of a smooth finish. If your project is for inside an oil-based primer will penetrate the wood best but if its. Steps to take for cleaning wood before staining is similar to painting.

Using a primer will give your paint a better surface to stick to. This will provide a smoother final finish. You can paint over varnished wood without sanding via using deglosser.

Work your way from the top to the bottom. When you water pop wood you wont have to do multiple coats of stain either. After this second sanding the wood is ready for a stain or clear protective finish to be applied.