How To Prep Wood After Sanding

If you plan on using a water-based stain use Minwax Water Based Pre-Stain Wood Conditioner.

How to prep wood after sanding. Power Sanding When youre working on a large surface its nice to lean on power tools for a little extra muscle. Not damp and not dripping but somewhere in the middle so that every inch of the wood is wet but with no puddles. On certain woods such as oak and ash pre-wet the wood with a damp cloth to raise the grain before final sanding.

After you have cleaned the wood with a damp rag following the sanding process it is time to prep the wood for stain. The primer also keeps any stains on the wood from coming through the paint. It is the primary tool to clean the woodwork.

To get the last 5 tack cloths are ok if using solvent based. How to clean wood for painting is a question many ask once the project is finished. Give them a good scrub using a sponge or cloth.

Wash the entire wood surface once youre finished scraping andor sanding. While you can use any cloth to do this a tack cloth will pick. Work efficiently by starting with a coarse sandpaper in the 60-100 grit range and gradually switch to finer sandpapers rated closer to 150 grit.

Use a palm sander or a random orbital sander to quickly strip away imperfections and previous layers of stain to reveal the underlying natural wood. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. Before sanding scrape loose and flaking paint from the siding.

Also the brush fibers could clean dust from tricky holes or corners. Choosing a pre-stain wood conditioner is simple. The next step is the trick here.