How To Prep Stained Wood Trim For Painting

You dont have to worry about being.

How to prep stained wood trim for painting. Its All in The Prep The prep work is a big reason why converting stained trim to painted is so labor intensive. Regardless of the religious factor involved in painting hardwood trim lololol if you must do it you need to buff sand the wood 150 or 220 is fine for this step. If youve never tried Krud Kutter you dont know what youre missing.

Thoroughly mix the primer with a paint stick and pour a small amount into a paint tray. You can use both water-based and oil-based primers on previously varnished surfaces. I am in no way a professional but this method works very well for me and I have been doing it this way for years.

Paint adheres well over water-based stain so after completing the prep steps outlined above apply a. A putty knife to scrape peeling paint and apply fillers a paint scraper for rough oil-based paint sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste. After the drying period if bare wood or spackle is showing apply another coat of primer to the trim.

The choice of primer is. Rinse thoroughly with a vinegarwater solution and let the trim dry. The very first thing you need to do is clean everything for that I use Krud Kutter.

In this DIY I show you how I paint wood trim. Using a paint brush or a rag apply an even layer of stain on the woods surface. After the Bins dries very lightly sand it again with 220-400 paper or 40 steel wool.

PRIME the trim with BINs Bullseye pigmented shellac. Apply stain-blocking primer to the trim. There are only a few items required to prep wood trim for painting.