How To Paint Old Cracked Wood
Remove all of the old paint around each crack and scuff the surface of the columns remaining paint.
How to paint old cracked wood. The cracks begin to form immediately. A few restorative strategies along with a fresh coat of properly applied paint can get rid of your cracked paint. You may need to do a few coats depending on how deep your cracks are.
Here goes nothingCheck out a viewer who used the technique to refinish some. Be sure to flex the putty knife to produce a flat surface. Step 2 Remove any soft or rotten wood from the column using a wood chisel and hammer to excavate the damaged area.
Instead the paint should be scraped off by hand using a paint scraping tool. You can probably knock out painting a full panel in about five minutes less if you only have small cracks on a few sides. Step 1 Put on your goggles and nose and mouth mask.
It is critical that you clean and seal the dry cracked wood on your homes exterior before you paint it to avoid costly repairs later. The high pressure of the sprayer can knock those old boards loose and infuse the bare areas of wood with water. To defeat wood rot you must destroy its source.
Also ensure that you remove any old coating that is peeling and fill in the cracks. Next when dry apply a thick coat of Vintage paint working very quickly without overlapping your application of paint. Use a flat sheened latex paint it cracks easily.
Use the edge of the sanding pad to reach the deep areas of the columns decorative designs. The more brittle easier paint can be lifted up scraped chipped away. Avoid overworking the paint.