How To Paint Chipped Wood Trim

Spray a coat of primer onto the surface using smooth steady sweeps.

How to paint chipped wood trim. Here is a very simple method to ge. If the wood is chipped gouged or otherwise damaged and you plan to paint you can make an easy invisible repair by using a two-part polyester resin compound. Apply a few thin or sparse coats of primer to the sanded areas with a paint roller -- as with paint a few thin coats of primer adhere better than one or two thick coats decreasing the chance of eventual chipping.

A step by step tutorial showing the easiest way of stripping gloss paint from door frames skirting. Sand Down the Wood Filler Attach a fine-grit paper on the oscillating sander and grind down the patched area until it is flush and smooth with the surrounding paint. Using a putty knife scoop out some Ready Patch and smooth it over the surface of the crater left by the chipped paint.

I cant stress enough that you want to gently remove loose paint. How to remove gloss paint from wood using a heat gun. Allow the primer to dry for the.

Paint the Area Finally its time to paint. Hold the spray gun approximately 1 foot from the surface. Paint always sticks better to clean surfaces.

Fill any cracks or holes from chipped wood as opposed to chipped paint with spackling paste or wood putty forcing the filler into the gap with a putty knife. Apply primer to trim covering any bare wood and spackled areas. Allow the filler to dry for at least three hours or as directed by the manufacturer before applying any paint.

Refer to the cans label which may suggest 10 or 20 minutes between coats. Coat the entire wood surface in a thin coat of the primer and then allow it. Fill Holes With Compound Use a flexible putty knife to fill all chips holes and cracks with spackling compound.