How To Make Wood Carvings Shine

There are a few ways you can go about making wood shiny and smooth.

How to make wood carvings shine. Spray the tips of your brush with a nonwax furniture polish and brush the polish onto your wood carving. It should lose roughness to the eye but a slight roughness will remain to the hand. Take clear pore filler and with a paint sponge.

Wipe the wood thoroughly until it is clean. Not on your carving take a piece of wood make few cuts in it in different directions and different depth and stainpaint it. Use 0000 steel wool for stubborn areas and an old toothbrush for grooves and corners.

Clean your wood sculpture with caution if the piece has not been sealed. Take your 60-grit sandpaper and sand down all the carvings surfaces by hand. Rub the solution in thoroughly focusing on a specific area.

Leave it to rest for about half an hour or come back to it after youve done anything else you need to do you cannot over-rest it. I understand that you are all excited when the carving is done and you want to have it finished and show it to everyone but PLEASE take time to experiment before you ruin it with bad paint or stain. Pay close attention and care to small details in the carving.

Pay close attention and care to small details in the carving. Always work in the wood grain direction to avoid scratches and damage and use as little liquid and apply as. Apply additional polish to the brush as need.

You can then sand it with a higher grit abrasive over your coats of finish to achieve smoothness. Follow the damp cloth with a dry one to remove any remaining moisture. For the many people who dont have woodworking workshops and are not in a place where they can have one wood carving is a great way of getting immersed int.