How Do You Prepare Woodwork For Painting

Of course if this sounds like too much hassle or hard work you can always call in the professionals.

How do you prepare woodwork for painting. Clean thoroughly with sugar soap sand down with a fine paper to give a key for the new paint and then apply your paint. Lightly coat the wood with your solution three times waiting half an hour between each coat to allow the wood to dry. This painting technique needs to prepare the wooden surface first.

You could use an electric sander on larger skirting boards window sills and doors. Sweep an orbit sander over the wood in wide circular strokes. This helps to seal the wood and prevents discolouration.

An undercoat is always a good idea on previously painted surfaces as it will give you a much better finish and stops the paint dragging on the surface. When the sanding is complete youll need to get rid of any bits of dust stuck to the woodwork. Be sure to hit corners recesses molding and any other features you intend to paint as well.

Once its dry use a piece of 180grit sandpaper to rub the area back to a smooth finish. As long as you prepare youll be able to paint. Follow these simple steps to get your surface prepared.

You can use a vacuum cleaner with a brush-type accessory so you dont damage the wood or a dusting brush. A sanding machine can be used cautiously for a large surface if preferred. The light scuffing action will produce a more textured surface that promotes proper paint adhesion.

Be a bit careful if your current paint is a glossy or silk finish. You can scrape these back to a solid edge then apply some wall filler. Wash down interior woodwork before painting.