How Do You Prepare Wood For Painting

Step 2 Sand the wood down if there is a varnish.

How do you prepare wood for painting. This goes beyond the paint job to include the actual paintings on the walls or that aesthetically pleasing living room and more. Wait for the wood to fully dry. Start with rough grit sandpaper and as the surface becomes smoother switch to sandpaper with a finer grit.

The aim of the game is to give yourself the best possible surface for all that lovely paint to stick to. It also evens out the wood particularly after using wood putty or filler leaving you with a smooth surface for applying paint. If you have a vacuum vacuum off the wood thoroughly followed by a sweep with a tack cloth.

To get a long lasting beautiful finish from your paint or varnish and to avoid flaking and chipping you will need to prepare your bare wood properly. Likewise how do you prepare wood for finishing. Use handheld sandpaper or an electric sander for sanding your wooden surface.

This type of primer will fill the wood pores and cavities in the wood. Apply two or three coats and make sure you leave plenty of time between each painting on half dried tacky gloss will spoil the end result. Apply two coats of alkyd enamel to finish your surface.

You should never skip the sanding step. An aluminum wood primer is recommended when the wood is to be exposed to moisture. 120 and gradually work your way to a finer grade eg.

So once you purchase a wood panel you need to do two important steps before painting. Now your wood is ready for painting. Apply a coat of white alkyd undercoat and let it dry for three to four hours.