Do You Wash Wood After Sanding
While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it.
Do you wash wood after sanding. Once you have removed all the finish off wash the surface with water if it is a wash away remover. You would need to remove the sanding dust. When exposed it will absorb water or the cleaner and warp.
The stain or paint would not last long if. Use the low power setting to avoid damaging the wood. One may also ask is Deck Cleaner necessary.
There are approved methods you can use to clean the dust before applying a polyurethane sealant or staining the surface. In the fourth step we can now take a clean rag and use more mineral spirits or just some water to wipe everything down. Power-washing a deck effectively gets it ready for refinishing but the force of the water leaves the wood fuzzy.
If not return to the sanding stage to get it right. At this stage there is no more residue on the surface and you should be down to bare wood if not you can lightly sand the small amount of paint or residue away. Make sure your deck is thoroughly dry before you sand.
Does salt water rot wood. Work the brightener into the wood with a stiff bristle brush using an extension handle on the brush if necessary. You can also choose to use a denatured alcohol if the remover that you are using is neither of these two.
By sanding before applying a fresh coat of stain you are ensuring the stain will adhere to the wood well and last for years before needing a new coat. It is good to use a shop vac to clean the surface between sanding grits removing the larger grit particles from the wood before sanding with the next higher grit. You can knock down the fuzz by sanding -- as long as you wait for the wood to dry.