Clean Sanding For Paint
Some chemical strippers you can use thinners to clean and neutralize the surface.
Clean sanding for paint. Use an ordinary sponge mop to clean your ceiling and walls thoroughly with TSP and water. Using Rubbing Alcohol as a Degreaser Cleaner. Sand paint with 180-grit.
Finishes that form a film on top of the wood paint shellac polyurethane etc often clog sandpaper so if youre using the sander on a large finished surface you might want to consider other options eg. Choose your coarsest grit 600 if you are sanding primer or bodywork 800-1000 if you are sanding a finished paint job. There are tons of paint strippers out there spanning across various brands and manufacturers.
Lacquer thinner works similarly to mineral spirits you apply it over the stripped surface to clean up the remaining residue. To ensure that you do not damage any of the underlay use light and short sanding stokes. Before starting prep the woodwork with soap and water cleaning off the surface.
Prepping Bare Metal For Primer Paint. There are few steps to follow to ready the wood for painting once you are done with sanding. Sanding in straight lines is better than circles.
Load your handheld sander or sanding block with the sandpaper and start sanding. Chemical stripper or scraping to remove the finish before sanding. Frequently wet the paper by dipping the sanding block into the water.
Rinse your walls using a slightly damp cellulose sponge. Rinse well and let dry. Woods that contain a lot of resin or oils can also build up easily.